Siew Wei Lee
- Pickles AR, Lee SW and Norcliffe BAW (2003): "Groundwater and ground movement around deep excavation" Journal Geotechnical Engineering, Proc. of ICE, 156, Issue GE3, July, pp. 147-158
- Lee SW, Bolton MD, Mair RJ, Soga K, Hagiwara T and Dasari GR (2002): "Asymmetrical injections near tunnel linings" Int. Journal of Physical Modelling in Geotechnics, December, Vol. 2, No.4, pp. 7-18.
- Lee SW, Bolton MD, Mair RJ, Soga K and Hagiwara T (2002): "Modelling of sequential injections near tunnel linings" Journal Soils & Foundations, December, Vol. 42-6, pp. 9-22.
- Lee SW (2002): "Compensation grouting in tunnelling: a case study" Journal Geotechnical Engineering, Proc. of the ICE, April, GT155, Issue 02, pp.101-109.
- Lee SW, Bolton MD, Mair RJ, Hagiwara T, Soga K and Dasari GR (2001): "Centrifuge modelling of injection near tunnel lining" Int. Journal of Physical Modelling in Geotechnics, March, Vol. 1, No.1, pp. 9-24.
- Lee SW, Choy CKM, Cheang WWL, Swolfs W and Brinkgreve R (2010): Modelling of tunnelling beneath a building supported by friction bored piles. Proc. of 17th Southeast Asian Geotechnical Conference, Taipei, May, 215-218.
- Lee SW, Cheang WL, Swolfs W and Brinkgreve R (2010): Modelling of piled rafts with different pile models. Proc. of NUMGE 2010, 7th European Conf. on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, June, 637-642.
- Lee SW, Cheang WL, Swolfs W and Brinkgreve R (2009): Tunnelling near a building supported by end-bearing piles. Proc. of Hong Kong Tunnelling Conference 2009, November, 135-145.
- Lee SW, Cheang WL, Swolfs W and Brinkgreve R (2009): Plaxis-GiD modelling of tunnel-pile interaction. Euro:Tun 2009, 2nd Int. Conf. on Computational Methods in Tunnelling, Bochum, Germany, September, 1045-1052.
- Lee SW and Cheang WL (2008): Some experience on finite element modelling of deep excavation using a small strain model. 12th Int. Conf. Computer Methods and Advances in Geomechanics, October, Goa, India, paper in post-conference circulation.
- Pickles AR, Li D and Lee SW (2008): Asphalt heaving at the Hong Kong International Airport - Investigation and design of remedial works. Proc. of Applications of Innovative Technologies in Geotechnical Works, HKIE Geot. Div. 28th Annual Seminar, pp. 43-53.
- Lee SW, Pickles AR and and Cheang WL (2008): 3D modelling of deep Excavation - CDG non-linear small strain stiffness and individual piles behaviour. Proc. of Applications on Innovative Technologies in Geotechnical Works, HKIE Geot. Div. 28th Annual Seminar, pp. 171-180.
- Lee SW, Li ESF, Pickles AR and Henderson TO (2007): Numerical modelling of single pile and pile group subjected to uplift and inclined pulling, Proc. of 16th Southeast Asian Geotechnical Conference, Kuala Lumpur, May, pp. 319-324.
- Lee SW, Pickles AR and Henderson TO (2006): Numerical modelling of laterally loaded short pile, Proc. of VI European Conference on Numerical Modelling in Geotechnical Engineering, Austria, Sept, pp. 557-562
- Lee SW, Pickles AR and Henderson TO (2006): Comments on the use of soil models when assessing the effects of tunnelling on adjacent structures, Proc. of Cavern and Tunnel Engineering, HKIE Geot. Div. 26th Annual Seminar, May, pp. 305-316
- Pickles AR, Lee SW and Sun RF (2006): Ground movement of deep excavation in reclamation, Proc. of XIII Danube-European Conference on Geotechnical Engineering, Slovenia, May, pp. 661-666
- Pickles AR, Hazan NNM and Lee SW (2004): Suggested amendments to Buildings Department Draft Code of Practice for Foundations, Conference on Foundation Practice in Hong Kong, 4 Sept, Hong Kong
- Hendy MS, Pickles AR, Lee SW, Sun SF and Hirai T (2004): Surcharging a drained reclamation in Hong Kong, Proc. of 15th Southeast Asian Geotechnical Conf., Bangkok, pp. 493-498
- Nazir R and Lee SW (2004): Horizontal load capacity of single piles in sand, Malaysian Geotechnical Conference 2004, 15-17 March, Kuala Lumpur, pp. 277-282
- Lee SW, Pickles AR, Henderson TO and Tosen R (2003): Settlement and load transfer of bell-out and straight sided socket bored piles, Proc. 12th Asian Regional Conf. of Soil Mechanics and Geotechnical Engineering, 4-8 August, Singapore, pp. 633-636
- Pickles AR, Lee SW, Tosen R (2003): Shaft capacity of friction piles constructed in saprolite under bentonite and implications for end bearing piles, Proc. of Case Histories in Geotechnical Engineering in Hong Kong, HKIE Geot. Div. 23rd Annual Seminar, May, pp. 213-222.
- Norcliffe BAW, Pickles AR and Lee SW (2002): The use of recharge wells to mitigate ground settlement on KCRC Contract CC300 Tsuen Wan Station and Approach Tunnels, Proc. of Geotechnical Aspects of Mass Transportation Systems, HKIE Geot. Div. 22nd Annual Seminar, May, pp. 121-130.
- Lee SW, Bolton MD, Dasari GR, Mair RJ, Soga K and Hagiwara T (2001): Centrifuge and numerical simulation of compensation grouting near tunnel lining, 15th ICSMGE Conference, Istanbul, August, Vol.2, pp. 1399-1402.
- Lee SW, Bolton MD, Mair RJ, Soga K, Dasari GR and Hagiwara T (2001): Soil models and stress paths on injection in sand, Proc. Regional Conf. on Geotechnical Aspect of Underground Construction in Soft Ground, Shanghai, April, pp. 626-631
- Lee SW, Bolton MD, Soga K, Dasari GR and Hagiwara T (2000): Modelling of injection in sand, Proc. Int. Conf. on Tunnels and Underground Structures, Zhao, Shirlaw & Krishnan (eds), Singapore, pp 665-670
- Lee SW, Bolton MD, Dasari GR, Mair RJ, Soga K, Sugiyama T, Ano Y, Hagiwara T and Nomoto M (2000): Centrifuge modelling of compensation grouting in dense dry sand, Proc. GeoEng2000, Melbourne, November, (paper in conference CD)
- Lee SW, Bolton MD, Mair RJ, Soga K, Dasari GR and Hagiwara T (2000): The influence of injection sequence in compensation grouting, Proc. 53rd Canadian Geotechnical Conference, Montreal, October, pp. 1013-1020
- Lee SW, Dasari G, Mair RJ, Bolton MD, Soga K, Sugiyama T, Ano Y, Hagiwara T and Nomoto M (1999): The effects of compensation grouting on segmental tunnel linings, Proc. Geotechnical Aspect of Underground Construction in Soft Ground, Tokyo, July, pp. 257-262
Journal
Geotechnical Consulting Group (Asia) Ltd.